Counterflashing is something that most people don’t know about until they have water leaking into their home.
There could be a water stain on your ceiling above your fireplace. Or maybe you have a wet feeling on the wall next to your chimney. You look at your roof and nothing looks wrong with the shingles.
Well maybe something is wrong with that small piece of metal on your roof.
What does counterflashing do? Well it helps prevent water from entering your home at the roof to wall transition. It sits on top of another piece of flashing to help keep water from getting behind it and infiltrating your home.
It’s not very glamorous but it plays a big role in keeping water out of your home.
Why Do We Need More Than One Piece of Flashing?
A chimney creates a big problem for a roof. The roof deck will be covered with shingles but we can’t shingle up a chimney and make it watertight. So how do we direct water around it? With flashing!
On a chimney the flashing below will work with the shingles to shed water from the roof to wall intersection. On the sides of a chimney there will be pieces of step flashing that will be stepped into the course of shingles. On top of those will be our counterflashing.
It’s almost like wearing multiple rain jackets. One piece of flashing will shed water off your roof and the counterflashing will help shed water running down your chimney or wall. You need both to do their jobs.
Where Can I Find Counterflashing?
Probably around your chimney. If you were to take a closer look at a masonry chimney you would see flashing installed at the intersection of the brick and roof. Some of that flashing is called counterflashing.
It can be used anywhere that you have roofing meeting a vertical surface such as a masonry wall. Base and counterflashing should be used together. Base flashing will go under your counterflashing to create a weather tight system.
Because things on a roof can move a little bit as temperature fluctuates. Your chimney can also move a little. So it’s best to have two pieces of flashing that can move independently of each other.
How Do Chimneys Leak?
There are many ways that water can enter your home around a chimney.
Water will travel down your roof towards the chimney. It will also travel down the chimney itself. During the winter months snow can build up behind your chimney and start to melt.
All of these can cause a leak if your flashing is compromised. Even a small leak can do great damage to your home.
It can get into your roof decking, framing, insulation and drywall. Even the masonry can start to deteriorate from moisture. Once you have water stains on your ceiling the leak has been going on for some time.
This is why a roof can leak with no damaged shingles.
Can Counterflashing Deteriorate?
Yes. Flashings can last a very long time but are subject to deterioration. Flashing that is made of galvanized can begin to rust. Metal can become loose and pull away from your chimney. Brick can crack and deteriorate. Some details on a roof can require sealants which can break down over time.
There can also be improper repairs done to a roof that cause problems. If a homeowner had a leak around their chimney and they had multiple patches put on their roof with roofing cement. This may plug the hole for now but not fix the root of the problem.
If you see large areas of old roof cement on your roof it’s probably a good idea to have someone check your roof.
They may need to repair your counterflashing as well.
Should I Replace My Counterflashing With A New Roof?
It’s always best to replace your flashing with a new roof.
GAF currently states that you can use existing counter flashing that is in good condition. It should be serviceable for the life of your new roof. If it is rusted through, cracked, or pin holed it should be replaced.
If you install a new roof and leave old flashing on there it will fail sooner than your new shingles.
When replacing a roof it is best to replace all the flashing around your chimney. Atlas Roofing & Siding will provide you with flashing when we install your roof.
How Do I Know If My Counterflashing Is Failing?
There are a few things that you can look for when trying to identify failed flashing on your roof.
Loose or bent flashing can indicate that it is failing. If there is no flashing that is a sign as well.
Here are some other things to look for.
- Brick that is cracked around your flashing
- Excess roof cement
- Flashing that has pulled away from your chimney
- Rust
- Stains in your home around the chimney
- Leaking after a heavy rain
Don’t climb on top of your roof to try and inspect this yourself.
A roof professional can help identify the source of your leak. It’s always better to have someone with experience on your roof to find the issue.
Water can travel a long distance before you see it in your home. You may not see the leak where it is actually occurring.
Do You Have Counterflashing Problems?
If your counterflashing is working properly you won’t even know it’s there.
That is what we want. Water will hit the top of your chimney and travel down your flashing system and onto your shingles. No problem.
But when that little piece of flashing fails you can end up with a roof leak that you don’t know where it’s coming from.
So what does counterflashing do? It helps protect your roof to wall transition. By overlapping another piece of flashing it keeps water moving away from your home.
Atlas Roofing & Siding offers roof inspections, repairs, replacements and maintenance throughout Union County, Madison County and Central Ohio. Contact Atlas Roofing & Siding for a free estimate.


